Have you ever got worried about Is it Dangerous to Leave Air in your Paintball Tank? During my own experience and interaction with people, I came across many paintball players confused about this problem. So after my research, I concluded that there is no danger in leaving the air in a paintball tank for an extended time. Because most paintball tanks are designed to store a small amount of pressurised air at all times, your regulator and bottle will be healthier if you do this. Furthermore, To leave the field at the end of the day, you are usually required to fill up your air tank. With this method, you can practice with your marker at home and run some drills to improve your ability. You can also use the air to have some fun practising with backyard targets.
Which Gas or air to choose?
CO2 and high-pressure air are used to power the paintball guns to make them run properly. Nevertheless, most players choose CO2 since these are the cheapest tanks to fuel their paintball markers and are primarily present in liquid form; however, high-pressure air can also be used, though it is more expensive. Luckily you can use both, but the more expensive tournament markers must use high-pressure air instead of CO2 since CO2 may damage these guns. Most paintball guns can run on CO2 or compressed air. Despite its low cost, CO2 can negatively affect any paintball gun since it’s volatile. The gaseous form of CO2 is converted from liquid to gas (and vice versa) each time you pull the trigger, tearing through the paintball gun as you do so. Apart from these features of CO2, temperature also affects its nature, resulting in rising the pressure inside the tank if temperature increases.
Also Read: Best Paintball Gear Bags in 2022
Therefore, both gases can be used; however, high-pressure air is my preferred choice since I have used both; however, I found HPA tanks to be bulkier than CO2, but I found high-pressure air to be the better investment.
Is an Air Tank Connected to a Paintball Gun a Good Idea?
Due to the reason that high compressed air or carbon dioxide slowly wears down the internal parts of paintball markers in the absence of an On/Off ASA assembly, it isn’t a good idea to leave HPA/CO2 tanks attached for too long a time with a paintball gun. After getting damaged, it would then be necessary to detach air tanks from the ASA and depressurize the tank; this method would help you save your marker from damages.
Is It Dangerous to Leave Air In Your Paintball Tank?
I have explained this problem at the beginning of the article, but here it would be in too much detail with the reason. Compression of air or compressed CO2 in a paintball tank is not dangerous. Thus, Co2 or HPA causes pressure inside the paintball tank, but it’s beneficial to the tank. The pressure inside the tank is indeed good for it. Interestingly, As a result, there is a possibility of moisture or other unwanted things entering your paintball tank if there is no internal pressure causing damage to internal parts of paintball markers, resulting in poor performance of the gun.
Overall, In practice, it’s unlikely you’ll ever see a liquid go into the fill nip of your paintball tank unless you force it in.
Paintball tanks can explode, but why?
The possibility of a paintball tank exploding exists. However, this is likely to occur only if you air up the tank while the oil is inside. You will either need to add the oil yourself or find a paintball tank that someone has previously filled with oil. A high-pressure air tank can also be tricky to fill. Oil has to be actively forced into the fill nipple to get inside. The pressure is expelled from the end of the regulator and not put in. That is the function of the fill nipple. This means that there are no oil stains inside your paintball tank from your ASA assembly.
A Paintball Gun and an Air Tank: How Do You Connect Them?
Connecting an air tank is exceptionally straightforward since I have done it; therefore, I will share my techniques with you people.
- Insert the air tank’s regulator into the ASA on the back of the paintball gun and rotate the tank clockwise until no rotation is possible.
- The threads on the regulator of your paintball gun should match the lines on the ASA to ensure nothing gets stripped.
- As for screwing the regulator into the ASA, there is no need to over tighten it. Rotate the air tank counterclockwise smoothly until you cannot turn it anymore, and that should be enough.
So follow these above three roles only, nothing more you have to do.
A Paintball Gun Air Tank: How Do You Disconnect It?
The air tank and paintball marker can be attached easily; however, removing them both can be tricky, as I realised for myself. Since I enjoy experimenting, that is why I did it so I could share it with you.
The main problem is that it damages the O-ring on your paintball if disconnected incorrectly.
As a recommendation,
- Turn the tank half a turn counterclockwise after attaching the barrel sleeve.
- As you slowly turn the tank counterclockwise, pull the trigger continuously.
- To remove the paintball gun from the ASA altogether, you must turn off the pressure in the paintball gun.
Identifying an empty paintball co2 tank
You can tell if a Co2 tank is empty by connecting it to a paintball gun and seeing if it pressurises the marker. If the Co2 tank makes a hissing sound, it is not open.
I am Concluding with a few Words
You are now almost at the end of the article; I hope our explanation about Is it Dangerous to Leave Air In Your Paintball Tank would have been cleared. Shortly, most paintball tanks are designed to hold a small amount of pressurized air at all times, so there is no danger in leaving the air in the tank for an extended period.
Rereading the article, again and again, will help you understand it better.